John Lewis JLTDH18 Manuale Utente Pagina 26

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
Vedere la pagina 25
Troubleshooting
Problem
1)
Possible cause Remedy
The tumble dryer
does not operate.
The tumble dryer is not connected to
mains supply.
Connect in at mains socket. Check fuse in
fuse box (domestic installation).
The loading door is opened. Close the loading door.
The On/Off button was not pushed. Push the On/Off button.
The Start/Pause button was not pushed. Push the Start/Pause button.
The appliance is in the standby mode. Push the On/Off button.
Unsatisfactory dry-
ing result.
Incorrect programme selection. Do the selection of the applicable pro-
gramme.
2)
The filter is clogged.
Clean the filter.
3)
The Dry plus option was in minimum lev-
el.
4)
Change the Dry plus option to the moder-
ate or maximum level.
4)
Too high volume of the load. Obey the maximum load volume.
The airflow grill is clogged. Clean the airflow grill in the bottom of the
appliance.
Dirt on the humidity sensor in the drum. Clean the front surface of the drum.
Incorrect remaining laundry moisture de-
gree.
Adjust remaining laundry moisture de-
gree.
5)
The heat exchanger is clogged.
Clean the heat exchanger.
3)
The loading door
does not closed
The filter not locked in the position. Put the filter in the correct position.
The laundry is locked between the door
and the seal.
Put the load correctly in the drum.
Err (Error) on the
display.
You try to change the programme or the
option after the start of the cycle.
Turn the tumble dryer off and on. Make the
new selection.
The option you try to activate is not appli-
cable with the selected programme.
Turn the tumble dryer off and on. Make the
new selection.
Tumble Dryer User Manual26
Vedere la pagina 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 35 36

Commenti su questo manuale

Nessun commento